Technical Datasheet

CELOPRO®  MT2011

Celopro MT2011 has been developed to improve the thickening properties of cement based dry mortars with low viscosity. It provides exceptional workability.


CELOPRO® MT2011 will give excellent paste stability over time. Giving the craftsman ample time to work with this product. It can be applied in CTA, plaster. CELOPRO® MT2011 provides good workability to those mortar product and it gives:


Excellent water retention

Very good thickening efficiency

Good anti-sagging

Good workability

Product Properties
Chemical basis:Hydroxypropyl methyl cellulose
Viscosity:Approximately 20,000 mPas ( 2% solution, on dry basis)
Particle size:Powder
Moisture content:Max. 5%
Bulk density:200-500 g/l
Recommended Dosage
Typical dosage:0.20 - 0.60%

Packaging

Celopro MT series are offered in two types of package:

1. Small bags: 25kg per bag. Packed in multilayer paper bags, with inner PE bag.

2. Big bags: 500kg per bag.

Storage

Celopro MT2011 is a non-perishable product. It is recommended to use the product in rotating on a first in first out basis. The product should be stored under dry and clean conditions in its original packaging and keep away from heat. The packaging is selected in a way to avoid ingress of moisture, but the water content of the packed product will / may increase if not stored dry.


Product Safety

According to the legislation on dangerous substances and preparations, Celopro cellulose ethers are not hazardous. Further data on the safety aspects of Celopro types are given in the Safety Data Sheet.


×

Contact Us

captcha