Cellulose ether for cement-based systems
Celopro® MT4016 is developed specially for cement based tile adhesives. MT4026 has a medium level viscosity and provides the finished product with well-balanced application properties such as
workability, open time, anti-sagging, bond strength etc. It also gives cost effectiveness to tile adhesive. MT4026 offers improved properties of,
Good water retention
Good thickening efficiency
Excellent workability
Nice bonding strength
High anti-sagging ability
| Product Properties | |
|---|---|
| Chemical basis: | Hydroxypropyl methyl cellulose |
| Viscosity: | Approximately 40,000 mPas ( 2% solution, on dry basis) |
| Particle size: | Powder |
| Moisture content: | Max. 6% |
| Bulk density: | 250-400 g/l |
| Recommended Dosage | |||
|---|---|---|---|
| Typical dosage: | 0.30 - 0.45% | ||
Celopro MT series are offered in two types of package:
1. Small bags: 25kg per bag. Packed in multilayer paper bags, with inner PE bag.
2. Big bags: 500kg per bag.
Celopro MT4016 is a non-perishable product. It is recommended to use the product in rotating on a first in first out basis. The product should be stored under dry and clean conditions in its original packaging and keep away from heat. The packaging is selected in a way to avoid ingress of moisture, but the water content of the packed product will / may increase if not stored dry.
According to the legislation on dangerous substances and preparations, Celopro cellulose ethers are not hazardous. Further data on the safety aspects of Celopro types are given in the Safety Data Sheet.
