Celopro MT6001 is special developed for dry mortar application with improved performance. It can be applied in cement based tile grout, plasters, decoretive coatings, rendering, plasters, jointing compound etc.
It is applicable for manufacturing all kinds of dry mortar products that requests lower thickening property,
MT6001 offers:
Good early strength
Easy formulation
Nice sag resistance
| Product Properties | |
|---|---|
| Chemical basis: | Hydroxypropyl methyl cellulose |
| Viscosity: | 6000-12000g/l |
| Particle size: | Powder |
| Moisture content: | Max. 5% |
| Bulk density: | Approximately 400mPas ( 2% solution, on dry basis) |
| Recommended Dosage | |||
|---|---|---|---|
| Typical dosage: | 0.3 - 0.5% | ||
Celopro MT series are offered in two types of package:
1. Small bags: 25kg per bag. Packed in multilayer paper bags, with inner PE bag.
2. Big bags: 500kg per bag.
Celopro MT6001 is a non-perishable product. It is recommended to use the product in rotating on a first in first out basis. The product should be stored under dry and clean conditions in its original packaging and keep away from heat. The packaging is selected in a way to avoid ingress of moisture, but the water content of the packed product will / may increase if not stored dry.
According to the legislation on dangerous substances and preparations, Celopro cellulose ethers are not hazardous. Further data on the safety aspects of Celopro types are given in the Safety Data Sheet.
