Technical Datasheet

CELOPRO®  MT3050

Celopro® MT3050 is a specially optimized Hydroxypropyl methylcellulose(HPMC). Celopro MT3050 is developed as a rheology modifier for cement based flow-able mortar and 3D printing mortar. Celopro MT3050 sigificantly improves the application properties of mortar, it gives:

good flowability of the liquid mortar

good suspension property


Product Properties
Chemical basis:Hydroxypropyl methyl cellulose
Viscosity:Approximately 3000-5000mPas ( 1% solution, on dry basis)
Particle size:Fine powder,about 100 mesh
Moisture content:Max. 8%
Bulk density:300-500g/l


Packaging

Celopro MT series are offered in two types of package:

1. Small bags: 25kg per bag. Packed in multilayer paper bags, with inner PE bag.

2. Big bags: 500kg per bag.

Storage

It is recommended to use the product in rotating on a first in first out basis. The product should be stored under dry and clean conditions in its original packaging and keep away from heat. The packaging is selected in a way to avoid ingress of moisture, but the water content of the packed product will / may increase if not stored dry.


Product Safety

According to the EU legislation on dangerous substances and preparations, Celopro MT is not hazardous. Further data on the safety aspects of Celopro types are given in the Safety Data Sheet.


×

Contact Us

captcha